But first things first....

It is SO easy to get ahead of yourself on a layout.  Such was the case for me.  I was definitely excited about getting some track down.  But laying track before installing a backdrop is not the best idea.  Sooo... time to put up some backdrops!  None of this is technically difficult.  Sharing some ideas that may help someone out there.

Started with 3/32 (1/8") Masonite (or Masonite equivalent - the thin, wobbly stuff) and painted them white.  The white provides a nice surface for painting later on.



Windows... framing... all looks a bit crude.  Watch the transformation....

I had put 2x3 posts up at strategic locations to support the Masonite.  As it turned out, I needed more, so they were added.  Once they were in, I used short (1-1/4") drywall screws to attach the sheets.  Each hole was pre-drilled and countersunk to keep the surface of the backdrop material as smooth as possible.  


Just adding some white background changed it from 'just a train room' to an inviting space.  What a difference!




As much as I liked methods used to minimize any imperfections on the backdrop - see blogs like Dave Cochrun's excellent Castle Rock & Pacific (Upper Level Fascia Install) - I simply did not have the patience to do all that gluing and clamping.  So I tried something new to get a smooth finish.  On my last expansion, I used drywall mud to blend the seams.  It worked OK, but a couple problems:
  • The mud took a lot of time to dry, and with multiple apply-dry-sand cycles, it was tedious and took a while
  • The mud took paint differently than the masonite.  
So... looking through the painters section of the local big-box store, I found something called painter's caulk.  Basically it is a low-shrinkage caulk that can be painted.  Tried it out, and it really worked out OK.  Not perfect, mind you, but 'good enough' for what I wanted.  ONWARD!




Then came the excellent talents of my lovely wife!  She is an artist by nature, and offered to put up a basic 'sky' for now.  WOW!  Suddenly some rough looking benchwork and a blank backdrop turned into a vista!

Warning: Serious talent at work!



Note the subtle dark to light blending she was able to achieve.  REALLY gives it some great perspective!



NEXT: Staging


Comments

  1. Dave...July 28, 2018 at 12:13 PM

    Great progress - LOVE THE LOGO! Ops can't be far away!

    ReplyDelete

Post a Comment

Popular posts from this blog

Configuring Push-buttons for Turnout Control in LCC (with BONUS section on Adapting JMRI for Feedback)

Image
So ALL the efforts, costs, brain damage and such to get LCC integrated into the layout is paying off in this one new step.  Let me explain. With LCC, each node is essentially its very own stand-alone microprocessor, capable of processing commands INDEPENDENTLY of a central PC or other server.  It just is connected to at the CAN bus, either looking for commands to respond (consumer) to or to issue them (producer).  SO... this addresses one of the goals of integrating LCC into my layout.  Sometimes I like to come down into the layout room and just run trains.  I don't have others with me, and for me, its a great way to unwind.  When I do that, I don't want to have to futz with turning on a PC and getting it going.  Ya, I know, some say it is not that big of a deal.  But if I am only going to be there for 5 or 15 minutes, seems like a hassle to mess with that.  I just want to through the power switch on, have the layout come to life, and run s...
Read more

LCC - Configuring a Push Button ~WITH~ Indication

Image
A few months ago there was a post on the LCC Groups.IO forum talking about the ability for one of the LCC node I/O points to both act as an INPUT, that is, to accept a push button command, AND act as an output, such as to illuminate an indicating light.  This is super cool!  Why?  Well at an all-in cost of around $3 per I/O point, it's hard to justify a lot of indicating lights on panels.  BUT... if we can get a "free" output for each discrete input, well, that is just like having your cake and eating it too!  (Never totally understood that analogy, but seems fitting.) The way this works is the node runs the I/O point as an output for 63 milliseconds, and then for a few milliseconds, it converts the output to an input where it polls the input.  So if it detects a "low" or a "high" in this window, it creates the appropriate event.  Slick, huh?  Timing at 63 ms is fast enough that even if the PB is just momentarily touched, it is enough to trigger...
Read more

More on LCC - Configuring a Turnout

Image
The blog post on configuring a node raised some eyebrows since the nodes come essentially already configured for detection.  I had to configure a bunch of Tortoise stall motor drive outputs, so presenting a step-by-step for configuring those kinds of outputs. For this post, I am using an RR-Cirkits Tower-LCC board with an RR-Cirkits SMD-8 stall motor driver board attached.  As before, everything is done via JMRI Panel Pro.   Open Panel Pro and then the OpenLCB config tool: As before, open the node and click on the Config Dialog: You'll see the info upload from the node.  This is a tower LCC with several points already configured.  We will do point 11: Click on tab Line 11 and, just as before, name the point.  Note that it changes to an orange background to show it was not changed on the node: Click on "Write" and it's in! Now scroll down to the Producer/Consumer options.  The whole discussion about producers and co...
Read more